Welcome to visit:Dongguan doher chemical co.,ltd. Official website

Service Hotline

086-18002918892

Your current location:Home>Products>Coating ink flame retardant
Doher-6000F
Doher-6000F
Category:Coating ink flame retardant
Similar products recommended
  • Product Description

Product description: Doher-6000F is a kind of flame retardant fabric coating with good water resistance, low smoke, non-toxic and halogen-free. It has excellent flame retardant properties for polyurethane resin, acrylic resin and epoxy resin.


Advantage:

1. The product is a phosphorus-nitrogen flame retardant, non-toxic, and does not release toxic gases during combustion, which is green and environmentally friendly;

2. The product has good water resistance and does not migrate or precipitate in water;

3. The particle size of the product is small and will not affect the appearance of the coating;

4. The product has high whiteness and can effectively prevent the coating from turning yellow;

5. Easy to use. Mix the flame retardant and glue evenly according to a certain ratio.


Quality Index:

Exterior

White powder

Whiteness

>93

Moisture

<0.5%

PH value

6.0-7.5

D50 particle size

10μm

 

Use and application:

1. Mix the flame retardant and glue in a certain ratio and stir for 15 to 30 minutes until the flame retardant is dispersed uniformly in the glue, that is, the flame retardant glue is prepared and can be directly used for finishing the fabric coating;

2. Use flame retardants with other flame retardants, such as Doher6503 and other flame retardants.

3. It is applied to the coating of polyurethane resin, epoxy resin, acrylic resin fabric, and the addition amount is 20% -30%.


Packing:

25kg per bag, lined with kraft paper bags.


Mobile